威尼斯官网

威尼斯官网:Hot keywords:Metering pumpscrew pumpHigh pressure water injection pump

Map | RSS | XML
螺杆泵

威尼斯官网:News category

威尼斯官网:contact

Huaian Ku Yu Machinery Co., Ltd.

Telephone:0517-83717380

Phone:18952335311

Zip code:23005

Fax:0517-83712629

mailbox:kysunfang @163.com

URL:www.hakyjx.com

How does the screw pump pump oil repair?

Now: Home >> News >> DYNAMIC

威尼斯官网:How does the screw pump pump oil repair?

威尼斯官网: Release time:2018-04-26 author:KeYu Machinery click:

How does the screw pump pump oil repair? Today the diaphragm metering pump manufacturer Koo machinery introduces the following repair methods for you.

screw pump


1. severe vibration of oil pump

Perhaps the electric rotor is unbalance, or the coupling is bad, the bearing is worn and bent; it may also turn some parts loose and broken; maybe because the pipe support is not strong. It can be adjusted, repaired, reinforced and replaced separately.


2. pipe leaking or leakage

The nut can not be screwed tightly when it is installed. If leakage is not serious, smear oil sludge or oil slurry mixed with asphalt oil in the areas where air leakage or oil leakage is possible. Temporary repairs can be coated with wet mud or soft soap. If oil is leaking at the joint, the nut can be tightened with the hand. The oil leakage must be reassembled.

  

3. filler overheating

Because the packing is too tight, the cooling oil will not enter the packing, or the shaft surface will be damaged. Appropriate measures should be taken to relax the stuffing and seal the pipe. The wear and tear of the packing must be replaced. Before installation, the oil is soaked and loaded in a circle. The incision should be staggered, so that oil leakage can be reduced. After packing the packing in the last lap, press the lid tightly and adjust the tightness when running.


4. oil pump does not suck oil or do not drain oil

The reasons are mostly stuck at the bottom valve, partly silted up in the oil filter, too high oil absorption height or oil absorption and leakage. After checking one by one, they can be treated by repairing the bottom valve, removing the silt, correcting the steering and cleaning the impeller.


威尼斯官网:Article URL:/en/news/468.html

威尼斯官网:Related labels:screwpump

Recent browsing:

Huaian Ku Yu Machinery Co., Ltd.

英文站底部.png

Address: Fuzhou Road 12, Huaian economic and Technological Development Zone

URL:www.hakyjx.com

网站上线二维码120.png


Online Service
  • SERVICESERVICE
二维码

威尼斯官网:Scan QR code

分享 一键分享
威尼斯官网-威尼斯平台登录